Cooling towers are one of the main components in most of the industries. They help in cooling the water that gets heated in many industrial processes. Water cooling towers India is helping many industries where cooling towers are must. Many industries uses water cooling tower without knowing many small technique which helps in making the water cooling tower more effective.

Following are the useful tips for increasing the efficiency of water cooling tower:

  • Cleanliness: – Unnecessary to say cleanliness is plays important role in each and everything. If your cooling vents are cleaned along with nozzles then the air flow is constant this allows proper functioning of water cooling towers as air is the most important part in it.

  • Air Speed: – In natural draft of cooling tower air speed are maintained through fans and propellers and in natural drafts the air flow depends upon natural breeze. It is necessary to maintain proper speed to make your water cooling tower more effective.

  • Water Distribution: – Constant flow of water distribution is must for effective working of cooling tower. Regular flow of water should be given in nozzles, hot water tanks and etc.

  • Air Speed: – In natural draft of cooling tower air speed are maintained through fans and propellers and in natural drafts the air flow depends upon natural breeze. It is necessary to maintain proper speed to make your water cooling tower more effective.

  • Check Leakages: – Ensure there is no leakage in the water cooling tower as it will fail the purpose of having one. Leakages don’t let proper flow of air which results in more use of electricity as the whole process becomes lengthier and costlier.

  • Keeping Away from Sun: – It is quite understandable that the cooling tower should be installed at the place where the sunlight is less likely to come. Sunrays will only increase the level of heat of the water making it warmer and makes the whole procedure inefficient.

  • Blow Down: – In some cases blow down for cooling is very important. In order to make this process free flow adequate balance between water flow and concentration of chemicals.

  • PH Alteration: – Cooling towers sometimes operates on high alkalinity with many acids such as sulphur to increase concentration. It becomes important that PH adjustments should be made in accordance with the quantity of water which needs to treat.

  • Periodical Inspection: – Specific date should be fixed to inspect the cooling water and the same should be entered in your record so that any deviation can be noticed. With cooling tower mainly filled with water it is bound to get corrosion further with many chemicals used in different processes the assemblies sometimes gets damaged therefore proper maintenance is need to be done.

  • Parts Installation: – Large cooling towers should be installed with proper and précised installation of parts. Proper base should be made with utmost planning for keeping fans and cylinders.

  • Design Meet Your Purpose: – Make sure the design you choose should be according to your business module. Keep in mind that every cooling tower doesn’t suits everyone.

Water cooling towers India are keen on making new designs which enables water cooling towers to work in most effective way so that they don’t become inefficient with passing of time.

Read More:
  • 5 Best Qualities of Cooling Tower Exporters in India
  • Copyrights © 2016, All Rights Reserved. | Articles

    Google Promotion Powered by NEX CORP - 9824127020